-
The amount of expansion space to be left in a fuel tank when fuel oil is being received, is determined by the ().
A . quantity of fuel to be received
B . flash point of the fuel as it is received
C . fuel temperature as it is received
D . viscosity of the fuel being received
-
Which of the actions listed should be taken FIRST to control an oil fire in a fuel oil tank?()
A . Commence draining that tank as quickly as possible
B . Seal off all vents to that tank
C . Activate the CO
system to that tank
D . Shut off the steam heating coil
-
Fuel oil tanks must be fitted with () that can be closed rapidly and remotely in the event of an emergency such as a fire.
A . stop valves
B . non-return valves
C . quick closing valves
D . relief valve
-
In a typical fuel system, the oil is stored in () in the double bottom.
A . setting tanks
B . service tanks
C . tanks
D . drain tank
-
Dirt in the fuel oil system of a diesel engine can cause ().
A . clogged filters
B . poor combustion
C . overloading of the diesel
D . shock of fuel line
-
When the fuel oil is burning in the combustion chamber, it ().
A . gives up large amount of heat
B . gives off large amount of heat
C . gives up large amount of steam
D . gives off large amount of steam
-
The sequence of parts in a generally used fuel oil supply system for a main engine is () (1)tanks in the double bottom (2)centrifuges (3)service tank (4)settling tank (5)viscosity regulator
A . (1)-(2)-(4)-(3)-(5)
B . (1)-(4)-(2)-(3)-(5)
C . (1)-(3)-(2)-(4)-(5)
D . (1)-(5)-(4)-(2)-(3)
-
To receive oil residues from the purification of fuel and lubricating oils in the machinery spaces, what kind of tank(s) should be provided on board?()
A、bilge tank
B、sludge tank .
C、overflow tank
D、oil collecting tank
-
Fuel oil contamination of an auxiliary diesel engine lube oil can result in()
A . an increased flash point
B . higher lube oil pressures
C . an increased viscosity
D . lower lube oil pressure
-
The FIRST course of action in fighting a fire in a cargo or fuel oil tank is to ().
A . secure all openings to the tank
B . discharge an initial charge of CO
with a hand portable extinguisher
C . direct a fire hose into the tank and energize the fire main
D . spray the tank boundaries with a fire hose to promote cooling
-
Because of the close tolerances used in diesel engine fuel oil pumps, a worn plunger requires()
A . grinding the spare plunger to the barrel
B . replacing the plunger and the barrel
C . highly polishing both the plunger and barrel
D . replacing plunger only
-
Improper maintenance of the fuel oil burners in an automatically fired auxiliary boiler, could result in ()
A . increased fuel consumption
B . increased feed water consumption
C . fuel pump failure
D . combustion control system failure
-
Heat for igniting the fuel oil in the cylinder of a diesel engine is generated by the ()
A . electronic ignition system
B . compression of air by the piston
C . friction in the fuel injector
D . fuel oil bearing system
-
The rate of expansion of heated fuel oil varies with the ().
A . conductivity
B . viscosity
C . volume
D . specific gravity
-
The selection of an oil depends () on the operating conditions, the design of the engine and the type of fuel to be burned.
A . to a great extent
B . on a great extent
C . on mainly
D . on only
-
The temperature of the fuel oil received during bunkering operations is critical in determining the()
A . expansion space to leave in a tank
B . flash point at which the fuel will burn
C . temperature to which the fuel must be heated
D . rate at which the fuel can be pumped during transfer operatio
-
The consistent burning of fuel oil with a high sulfur content in a diesel engine will result in ()
A . clogged fuel injection pumps
B . increased cylinder liner wear
C . intake valve stem corrosion
D . varnish deposit on pisto
-
The burning of the fuel adds more heat to the air charge, causing it to expand and force the engine piston to do work on the crankshaftWhat does “it” mean in this sentence?()
A . the burning
B . the fuel
C . the air charge
D . the engine pisto
-
The percentage of impurities in a specific fuel oil sample is determined by ().
A . settling in a fuel tank
B . testing in a laboratory centrifuge
C . burning in a calorimeter
D . testing in a closed cu
-
Fueling results in the collection of waste oil in drip pans and containers. Which is an approved method of disposing of the waste oil? ()
A . Draining it overboard when the vessel gets underway
B . Placing it in proper disposal facilities
C . Adding sinking agents and discharging it into the water
D . Mixing it with dispersants before draining it overboard
-
The 1982 Oil and Gas Act gives power to permit the disposal of assets held by the Corporation, and the Corporation's statutory monopoly in the supply of gas for fuel purposes so as to permit private companies to compete in this supply.
A.defers
B.curtails
C.triggers
D.sparks
-
When the heavy fuel oil is heated to achieve the viscosity of 10-15 cSt, may occurTo avoid this, a system is used in most occasions.
A.boiling and cavitations; low temperature
B.boiling and cavitations; pressurized
C.leaking and boiling; low temperature
D.leaking and boiling; pressurized
-
Which of the following conditions indicates the dilution of diesel engine lube oil by fuel oil? .
A.Water discharging from the water outlet of the lube oil purifier
B.Fuel oil discharging from the water outlet of the lube oil purifier
C.Lube oil discharging from the water outlet of the lube oil purifier
D.A change in the lube oil viscosity
-
In purification, there is no fuel oil in the clean oil outlet.It could be caused by _____. I.too high temperature of the dirty fuel oil; II. too low temperature of the dirty fuel oil; III. Clogged filter
A.I
B.I.II.III
C.II.III
D.II