After the show ip route command has been entered,the follwing routes are displayed.Which route will not be entered into the routing table of a neighboring router?()
A . R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
B . R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
C . C 192.168.1.0/24 is directly connected, Ethernet 0
D . R 192.168.5.0/24 [120/15] via 192.168.2.2,00:00:10,Serial0
-
The following line of output was gathered on Enterprise Router Ent1 using the command show ip route. Which of the following answers is most likely to be true, based on thi s output?() B 128.107.0.0 [20/10] via 11.11.11.11, 00:02:18
A . This router has set the Weight of this route to 10.
B . This router's BGP table lists this route as an iBGP route.
C . This router's MED has been set to 10.
D . This router's BGP table lists an AS_Path length of 10 for this route.
-
The following output occurs on Router R2. Which of the following statements can be confirmed as true based on the output from R2?() R2# show ip policy Interface Route map Fa0/0 RM1 Fa0/1 RM2 S0/0/0 RM3
A . R2 will forward all packets that enter Fa0/0 per the PBR configuration.
B . R2 will use route map RM2 when determining how to forward packets that exit interface Fa0/1.
C . R2 will consider using PBR for all packets exiting S0/0 /0 per route map RM3.
D . R2 will consider using PBR for all packets entering S0/0/0 per route map RM3.
-
Based on the show ip route isis output on R1, which statement is true? ()https://assets.asklib.com/images/image2/2018073017310541773.jpg
A . The i su 10.1.0.0/23 route is a suppressed route.
B . The i su 10.1. 0.0/23 route is a summary route.
C . The i su 10.1.0.0/23 route is an IS - IS external route.
D . The R1 IS - IS router is an ASBR.
E . The R1 IS - IS router is an ABR that belongs to multiple IS - IS areas.
F . The R1 IS - IS router is performing route aggregation and is suppressing the more specific 10.1.0.0/23 prefix.
-
在172.17.22.0网络上的用户无法到达位于172.31.5.0网络上的服务器。网络管理员连接到控制台端口,发出show ip route命令,并且能ping服务器。基于在图示显示的show ip route命令拓扑结构的输出,失败的原因是什么?()https://assets.asklib.com/images/image2/2018072316230752528.jpg
A . IP路由未启用
B . 静态路由配置错误
C . 该网络还没有完全收敛
D . 咖啡馆的快速以太网接口被禁用
E . 对咖啡的路由表尚未更新
F . 邻居关系表不正确更新
-
What can be determined from the line of show ip route output shown in the exhibit?()https://assets.asklib.com/images/image2/2018072315260414840.jpg
A . The next routing update can be expected in 35 seconds.
B . The IP address 10.10.10.6 is configured on S0/1.
C . The IP address 10.10.10.8 is configured on S0/1.
D . This route is using the default administrative distance.
E . The 10.10.10.8 network is two hops away from this router.
-
After executing the "show host" command, which of the information below would you see?()
A . The IP addresses of workstations allowed gain access to the router via an access list
B . Permanent name-to-address mappings created using the ip host command.
C . Temporary and permanent DNS entries.
D . The names of the routers created using the hostname command.
E . The length of time of users logged into the router, as well as the duratio
-
You use OSPF as your network routing protocol. You use the command show ip route and you see several routes described as O, O IA, O E1, and O E2. What routes are in your area?()
A . O IA
B . O E1
C . O E2
D . O
-
After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C. The following output is shown:
https://assets.asklib.com/images/image2/2018073016544395192.jpg
What can you conclude about this network? ()
A . The network has been stable for at least the last 45 minutes
B . There is a flapping link or interf ace, and router C knows an alternate path to the network
C . There is a flapping link or interface, and router A does not know an alternate path to the network
D . EIGRP is not working correctly on router C
E . There is not enough information to make a determinatio
-
The Testking router is running both RIP and IGRP, and the same route is learned by this router from both of these methods. However, when you issue the command"show ip route" you see only the IGRP route, and not the RIP route. Why is this?()
A . IGRP has a faster update timer.
B . IGRP has a lower administrative distance.
C . RIP has a higher metric value for that route.
D . The IGRP route has fewer hops.
E . The RIP path has a routing loop.
-
A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?()
A . show ip eigrp topology
B . show ip eigrp topology all - links
C . show ip route eigrp
D . show ip route eigrp all - links
E . show ip eigrp topology all - learned
-
What can be determined from the line of show ip route output shown in the exhibit?()https://assets.asklib.com/images/image2/2018072314443016558.jpg
A . The next routing update can be expected in 35 seconds.
B . The IP address 10.10.10.6 is configured on S0/1.
C . The IP address 10.10.10.8 is configured on S0/1.
D . This route is using the default administrative distance.
E . The 10.10.10.8 network is two hops away from this router.
-
After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C. The following output is shown:
https://assets.asklib.com/images/image2/2018073016572581079.jpg
What information can you determine about this network?()
A . The network is stable
B . There is a flapping link or interface, and router C knows an alternate path to the network
C . There is a flapping link or interf ace, and router C does not know an alternate path to the network
D . EIGRP is not working correctly on router C
E . There is not enough information to make a determinatio
-
What can be determined from the line of show ip route output shown in the exhibit?()
A . The next routing update can be expected in 35 seconds.
B . The IP address 10.10.10.6 is configured on S0/1.
C . The IP address 10.10.10.8 is configured on S0/1.
D . This route is using the default administrative distance.
E . The 10.10.10.8 network is two hops away from this router.
-
思科设备路由表查看方法show ip route。
A . 正确
B . 错误
-
查看路由器的ARP表的命令是show ip route。
A . 正确
B . 错误
-
The following exhibit shows ipv6 route output. What would the metric be fo r a summary route that summarizes all three OSPFv3 routes displayed?()https://assets.asklib.com/images/image2/2018073108574683495.png
A . 160
B . 140
C . 120
D . 100
-
The system administrator notices that after running netstat -rn, several small c’s are showing up under the flags columns, and routes that were not defined are also showing up. How can these cloned routes be stopped?()
A . By default cloned routes are turned on. To turn cloned routes off issue the command: #no -o tcp_pmtu_discover=0 #no -o udp_pmtu_discover=0 and add to the rc.net or rc.bsdnet file for next reboot
B . By default cloned routes are turned on. To turn cloned routes off issue the command: # no -o tcp_pmtu_discover=1 #no -o udp_pmtu_discover=1 and add to the rc.net or rc.bsdnet file for next reboot
C . By default cloned routes are turned on. To turn cloned routes off issue the command: #no -o ipforwarding=0 and add to the rc.net or rc.bsdnet file for next reboot
D . By default cloned routes are turned on. To turn cloned routes off issue the command: #no -o ipforwarding=1 and add to the rc.net or rc.bsdnet file for next reboot
-
The railway's Brussels route is brought forth to show that ______.
A.the Eurostar train service is not doing good business
B.the airlines can well compete with the railway
C.the Eurostar train service only caused little damage
D.only some airlines, such as Air France, arc suffering
-
After the PTN network is divided into domains, different domains transmit the routing information via().
-
在路由器上使用()命令查看路由表。A.route printB.show ip routeC.show routing-tableD.display i
在路由器上使用()命令查看路由表。
A.route print
B.show ip route
C.show routing-table
D.display ip routing-table
-
Router R1 lists 4 routes for subnet 10.1.1.0/24 in the output of the show ip eigrp topology all - links command. The variance 200 command is configured, but no other related commands are configured. Which of the following rules are true regarding R1‘s decision of what r outes to add to the IP routing table?Note that RD refers to reported distance and FD to feasible distanc E.()
A. Adds all routes for which the metric is <= 200 * the best metric among all routes
B. Adds all routes because of the ridiculously high variance setting
C. Adds all successor and feasible successor routes
D. Adds all successor and feasible successor routes for which the metric is<=200 * the best metric among all routes
-
A network design shows that R1 has four different possible paths from itself to the Data Center subnets.Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?()
A. show ip eigrp topology
B. show ip eigrp topology all - links
C. show ip route eigrp
D. show ip route eigrp all - links
E. show ip eigrp topology all - learned
-
Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0".Whic h of the following is most likely to have caused this output to occur on R1?()
A. R1 has been configured with an ip default- network 2.0.0.0 command.
B. R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.
C. R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
D. Another router has been configured with an ip default - network 2.0.0.0 command.
E. Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
-
46、网络管理员已输入如下命令:ip route 192.168.10.64 255.255.255.192 serial0/0/1 网络管理员输入命令 show ip route 后,该路由并未在路由表中。管理员下一步应如何操作?
A.使用正确掩码重新输入命令。
B.验证 Serial 0/0/1 接口处于活动状态且可用。
C.验证 192.168.10.64 网络在网络基础设施内处于活动状态。
D.使用网络编号而不是可用的 IP 地址重新输入命令。