-
You encrypt your files to ensure the security of the files. You want to make a backup copy of the files and maintain their security settings. You have the option of backing up to either the network or floppy disk. What should you do？（）
A . Copy the files to a network share on an NTFS volume and do nothing further.
B . Copy the files to a network share on a FAT 32 volume and do nothing further.
C . Copy the files to a floppy disk that has been formatted by using Windows 2000 Professional.
D . Place the files in an encrypted folder， and then copy the folder to floppy disk.
-
If a disk module on an XIV Storage System fails, what likely happens?（）
A . the system slows significantly but still runs
B . the customer data is lost temporarily but can be recovered
C . the system goes into Read Only mode until redundancy is restored
D . the system redistributes itself and keeps running seamless to the end user&e
-
请解释link_fail参数的意思？
-
A System p administrator needs to replace a failed internal disk in a mirrored rootvg. Which of thefollowing is one of the steps that would need to be followed（）
A . Run cfgmgr
B . odmdelete CuAt
C . exportvg rootvg
D . Deallocate LPs from failed disk
-
卡件XP367的FAIL RUN WORK COM POWER灯代表什么意思？
-
You encrypt three files to ensure the security of the files. You want to make a backup copy of these three files and maintain their security settings. You have the option of backing up to either the network or a floppy disk. What should you do？（）
A . Copy the files to a network share on an NTFS volume. Do nothing further.
B . Copy the files to a network share on a FAT32 volume. Do nothing further.
C . Copy the files to a floppy disk that has been formatted by using Win2000 Professional. Do nothing further.
D . Place the files in an encrypted folder. Then copy the folder to a floppy disk.
-
The rootvg disk on a system failed and was replaced. The system was restored using the latest mksysb. However， no files in the /home filesystem were restored. What is the likely cause of this problem？（）
A . The new drive is too small to hold the entire rootvg
B . The /home filesystem was not mounted during creation of the mksysb
C . The /home stanza in the bosinst.data contained an entry ’restore=no’
D . The /home filesystem was NFS exported to another system during creation of the mksy
-
You need to recommend a disk configuration for the planned SQL Server deployment.The solution must ensure that the servers can fail over automatically. What should you include in the recommendation？（）
A . GPT disks and basic disks
B . GPT disks and dynamic disks
C . MBR disks and basic disks
D . MBR disks and dynamic disk
-
You have a computer that runs Windows XP Professional. You need to create a floppy disk to start Windows XP Professional on the computer if the start files become corrupt. What should you do?（）
A . From the Windows XP Professional computer, run diskcopy.exe /v a:.
B . From a computer that runs Windows 98, create a MS-DOS-based startup disk.
C . From the Windows XP Professional computer, create an Automated System Recovery (ASR) disk.
D . From the Windows XP Professional computer, format a floppy disk. Copy the NTLDR, ntdtetect.com, and boot.ini files to the floppy disk.&e
-
Disk boot failure insert system disk and pressenter是什么意思（）
A . A、系统错误引起文件丢失
B . B、内存条问题引起文件丢失
C . C、系统问题电子盘丢失
D . D、系统问题引起文件丢失
-
An administrator has mirrored the root volume group to a second disk， but ’bootlist’ is failing to correctly add the second disk. What is the likely cause of the problem？（）
A . The administrator has failed to run ’bosboot -ad <2nd disk>’ prior to the bootlist command.
B . The administrator has failed to run ’bootinfo -B <2nd disk>’ prior to the bootlist command.
C . The administrator has failed to run ’mirrorvg -m rootvg <2nd disk>’ prior to the bootlist command.
D . The administrator has failed to run ’bosboot -ad /dev/ipldevice <2nd disk>’ prior to the bootlist command.
-
An administrator has mirrored the root volume group to a second disk, but 'bootlist' is failing to correctly add the second disk. What is the likely cause of the problem?（）
A . The administrator has failed to run 'bosboot -ad <2nd disk>' prior to the bootlist command.
B . The administrator has failed to run 'bootinfo -B <2nd disk>' prior to the bootlist command.
C . The administrator has failed to run 'mirrorvg -m rootvg <2nd disk>' prior to the bootlist command.
D . The administrator has failed to run 'bosboot -ad /dev/ipldevice <2nd disk>' prior to the bootlist command.
-
You need to ensure that you can recover system configuration and data if your computer hard disk fails. What should you do？ （）
A . Create a system restore point.
B . Create a backup of all file categories.
C . Create a Complete PC Backup and Restore image.
D . Perform an Automated System Recovery （ASR） backup.
-
One of the mirrored disks for the root volume group has failed. Although the logical volumes are mirrored, and the bosboot command was run, the machine will not boot. What is the most probable cause?（）
A . Quorum was not turned off
B . Paging space was not mirrored
C . The dump space was not mirrored
D . The surviving disk was too small
-
A Site Administrator is preparing for disaster recovery. In the case that a hard disk fails， which of the following would he need to do to have a complete backup？（）https://assets.asklib.com/images/image2/2018080211241070932.jpg
A . A
B . B
C . C
D . D
E . E
-
JX-300XP系统主控卡的各指示灯表示一定的意思，其中FAIL（）。
A . 运行指示
B . 准备就绪
C . 故障报警或复位指示
D . 工作/备用指示
-
A system administrator’s daily monitoring has revealed a failing disk drive. The drive that is failing， hdisk0， is a lvm mirrored drive. What is the first step that should be taken in order to physically replace this drive？（）
A . Remove the physical volume from the system.
B . Remove the physical volume from the volume group.
C . Remove the physical partitions from the volume group.
D . Remove the logical volume copies from the failing drive.
-
An administrator needs to replace a failed internal disk in a mirrored rootvg. Which of the following is one of the steps that must be followed（）
A . Deallocate rootvg mirror
B . Use hot replace manager
C . Break rootvg mirror
D . Deallocate LPs from failed disk
-
You need to ensure that you can recover system configuration and data if your computer hard disk fails.
What should you do?（）
https://assets.asklib.com/images/image2/2018073115505112806.jpg
A . A
B . B
C . C
D . D
-
Which of the following procedures should occur before removing a failing disk from a volume group?（）
A . Veryoff the volume group
B . Unmount any filesystems on the disk
C . Remove all physical partitions on the disk
D . Unmount mirrored filesystems from the disk
-
floppy disk的中文释义为“软盘”（)
是
否
-
You are the network administrator for TestKing. The network consists of a singleActive Directory domain that contains five member servers running Windows 2000Server. All five servers have CD-ROM drives and floppy disk drives.You purchase a new computer that has a CD-RW drive. This computer does notcurrently have a floppy disk drive, but you plan to install one eventually.You install and configure Windows Server 2003 and Recovery Console on the newcomputer. You configure it as a member server named Testking6.Now you need to ensure that Testking6 can be restored in the event of an operatingsystem failure.Which two actions should you perform？ （）(Each correct answer presents part of thesolution. Choose two.)
A. Copy Asr.sif, Asrpnp.sif, and Autorun.exe from the appropriate directories on Testking6 to another server. Copy the same files to a CD-Rom.
B. Copy Asr.sif and Asrpnp.sif from the appropriate directory on Testking6 to another server. Copy the same files to a floppy disk.
C. Start the Automated System Recovery wizard on Testking6.
D. Start the Create an Emergency Repair Disk wizard on Testking6.
E. Copy Autoexec.nt, Config.nt, Setup.log, and Autorun.exe from the appropriate directories on Testking6 to another server. Copy the same files to a CD-Rom.
F. Copy Autoexec.nt, Config.nt, and Setup.log from the appropriate directories on Testking6 to another server. Copy the same files to a floppy disk.
-
在B737-600驾驶舱增压控制面板上“AUTO FAIL”灯亮的意思是（）
A．组件工作在高流量方式或混合活门在全冷位
B．组件工作在高流量方式且混合活门在全热位
C．组件工作在高流量方式且混合活门在全冷位
D．组件工作在低流量方式或混合活门在全冷位
此题为多项选择题。
-
You are the network administrator for your company. All network servers run Windows Server 2003.One of your servers contains a RAID-5 volume. Routine monitoring reveals a failed disk in the set. Theserver is running and users are connecting to shared folders on the RAID-5 volume.You shut down the server and replace the failed disk.Now you need to ensure that the RAID-5 volume is redundant.What should you do？ （）
A. Initialize the new disk. Select the failed region and then select the Repair Volume option.
B. Import the foreign disk. Select the failed region and then select the Repair Volume option.
C. Initialize the new disk. Select the failed region and then select the Reactivate Disk option.
D. Import the foreign disk. Select the failed region and then select the Reactivate Disk option.
